Nar-Coil
|
|
Safe
Scale Remover For |
|
Nar-Coil TM Nar-coil is a low-pH product developed for cleaning evaporator coils, air-cooled condensers and other finned cooling and heating coils from SCALE and CORROSION development on the surfaces of the coils. Nar-Coil is a blend of solvents, wetting agents and acids specifically made for use in the cleaning of aluminium finned air-cooled condensers. Nar-Coil is a safe scale remover, designed for heavy duty cleaning and brightening of equipment condenser coils, fins and other equipment surfaces. High foaming cleaning action pushes dirt, greases and oils out of coils with the utmost in safety to the applicator and the job site as compared to HF-based products.
|
| Description Within minutes after the application of Nar-Coil, the chemical will dissolve all the scale deposits and will create foam that will expend outward from the center of the coil. The foam, as it expands outward through both the front and back of the coil, will loosen and remove even baked on contamination from the fin and tube surfaces.
|
| Special Features - safe
scale remover
Synergistic acid-based formulation.
|
| Directions for use 1. Goggles, gloves and other protective garments should be worn when using this product. System should be shut off. 2. Apply with a low pressure electrical or plastic sprayer 3. Prepare cleaning solution by mixing one part Nar-Coil with one to three parts of water. 4. Spray cleaning solution onto dirty coils or surfaces and allow it to remain in contact with the scale on the surfaces for 5-10 minutes. 5. Rinse thoroughly with water, then return system to service. 6. Rinse out sprayer as well as its spraying wand and nozzle.
|
| Packaging Size
- scale remover
*1-gal. bottle
|
| Product Literature Downloads: |
Nar-Coil - Individual Product Bulletin
MSDS - Nar-Coil, Safe Scale Remover , in HTML version
MSDS - Nar-Coil in PDF File for download & printing
Product Data Sheet - Nar-Coil
Need Help in selecting the proper Coil Cleaners for your requirements?
