|
A "No
Rinse" Cleaner For Air-Cooled Equipment
& Filter Cleaning
  |
|
Coil-Ox TM
A revolutionary "no rinse" product
formulated specifically for indoor cleaning of evaporator coils. It is
metal safe and will not harm the metal of the coils. The
Coil-Ox is very good for light to moderate cleaning jobs, and it is
ideal for seasonal coil treatment to prevent future contamination of
the coils. Coil-Ox is highly concentrated. Use ratio 3 parts
water to 1 part of Coil-Ox
|
| Description
Coil-Ox concentrate is a Non Acid coil
cleaner. It is manufactured to be strong enough to emulsify and remove
contamination from heat transfer surfaces. The key to the use of Coil-Ox
" no rinse " cleaner
is to apply it to the upstream (intake) side of the coil with the
air-flow on whenever possible. This method of application causes the
chemical to mix with the air on its normal turbulent pass through the
coil thereby wetting with chemical all heat transfer surfaces exposed to
the airflow.
|
 |
| Special Features
Non Acid, safe for use, cleaner. No Rinse
required after application. Deep penetrating quality's Special
patented detergent cleaner. Safe for use. Pleasant
odor. Biodegradable. |
Directions for use
1. Goggles, gloves and other protective garments
should be worn when using this product. System should be operating
2. Prepare cleaning solution by mixing one part
Coil-Ox with one to three parts of water.
3. Apply upstream (intake) side of the coil with the
air-flow on using a low pressure electrical or plastic sprayer
4. Spray cleaning solution onto dirty coils or
surfaces and allow it to remain in contact with the coils and on the surfaces.
|
| Packaging Size
*1-gal. bottle
*2 1/2-gal. bottle
*55-gal. drum
|
| Product Literature
Downloads:
|