Wholesale HVAC&R Supplies

Water Conditioners Prolong Service Life of HVAC/R Systems | Air Conditioner Cleaners

Water treatment is a must for keeping systems operating optimally. Without the use of a water conditioner, a system is left vulnerable to mineral precipitates which can decrease efficiency and result in the need for an ac repair. The result is cost increases and ultimate equipment breakdown if the situation is ignored. Whether soft or hard water environments; heating, ventilation, air conditioning or refrigeration, treatment is essential. Water treatment solutions include calcium scale removers, scale inhibitors and corrosion inhibitors. You can visit the following websites www.accurateelectricplumbingheatingandair.com/cooling/ to get further details.

Scale Formation
Dedicated conditioning of water must be considered an ongoing process from the moment you decide to get an ac installation. Intermittency is not an option if all practical expectations are to be met. If, however, a facility has fallen victim to faulty maintenance, a calcium scale remover may be needed before prophylactic measures can begin to be put into practice.

Calcium carbonate is the most problematic mineral scale because of its inherent inverse solubility property; the higher the surface temperature, the less soluble the calcium becomes. Essentially, this scale is the precipitate of dissolved solids from water in contact with heat-transfer surfaces. To combat its accumulation, the most utilized and thorough calcium scale remover programs include bleed-off and treatment with chemical compounds — including dispersant polymers, phosphates, molybdates or carboxylates — combined with mechanical filtration to remove suspended solids.

Inhibitors
In order to control contaminant buildup, any successful water treatment program has to comprise vigilant oversight, testing and precautionary steps specifically targeting buildup. Corrosion and scale inhibitors are the industry’s first line of protection for any system. As defined, inhibitors hold the undesirable materials in check. Typically, they are blended formulations, easily available and system and contaminant-specific. It doesn’t take much scale inhibitor product to garner the desired effect: it’s generally added at the ppm level to the recirculating water. For the protection it offers to systems’ components, the value is immeasurable.

Corrosion inhibitors act as shields between the metal being attacked and the offending corrosive agent, thus inhibiting the corrosion process. They include amides, phosphate organics, silicates, sodium molybdate and sodium nitrite.

Used consistently, water conditioning programs provide the most achievable means of optimal efficiency in HVAC/R environments. Don’t forget that you should also look at warranty programs that can cover any possible damages to your hvac system, learn more about it here!

 

For further information on HVAC systems, be sure to check  the AirNow Cooling & Heating company.

Share →